Help keep your pool water clearer, cleaner and easier to maintain with Dazzle Phos Cleanse Plus – Pool Phosphate Reducer 1 L.
 

 
Phosphates can build up in pool water from many sources, including rain, leaves, organic debris, dust, fertilizers, cosmetics, lotions, fill water and outdoor contaminants. When phosphate levels are high, they can feed algae and make pool maintenance more difficult.
 
Dazzle Phos Cleanse Plus is a super-concentrated formula designed to reduce high phosphate levels in pool water. By removing phosphates, this product helps limit the food source available for algae, allowing approved sanitizers such as chlorine or salt systems to work more effectively.
 
This product is especially useful when water testing shows elevated phosphates, particularly above 300 ppb. It can be used as an initial treatment to correct a significant phosphate buildup, then followed with Dazzle Pure Wow! Assure for weekly maintenance to help keep phosphate levels low.
 

 
Dazzle Phos Cleanse Plus works through the pool filtration system. Water may become slightly cloudy after application; this is normal while the product works and phosphates are captured by the filter. For best results, keep the pump and filtration system running during application and clean the filter according to the instructions.
 

 
Whether customers are searching for a pool phosphate remover, phosphate reducer, algae prevention support, a solution for cloudy water caused by phosphates, or a Dazzle product to help chlorine work more efficiently, Phos Cleanse Plus is an excellent choice for controlling high phosphate levels.
 

 
Why Use It?
Helps reduce high phosphate levels
Helps limit the food source available for algae
Helps sanitizers work more effectively
Super-concentrated formula
Ideal when phosphates are above 300 ppb
Helps improve water clarity and quality
Works through the filtration system
May reduce sanitizer demand when phosphates are controlled
Perfect as an initial treatment before weekly maintenance with Dazzle Pure Wow! Assure
 

 
Recommended Use
Have water tested to determine phosphate levels before application.
Shake the bottle well before use.
Make sure the pump and filter are operating during application.
Pour the required amount slowly into a clean skimmer.
Run filtration continuously until the water clears.
Do not clean the filter for at least 48 hours to allow the product to work.
After 48 hours, clean or backwash the filter, then repeat application if phosphate levels remain high.
Reduce phosphates gradually when levels are very high to avoid excessive filter pressure.
 
Always follow the instructions on the product label.
 

 
Important Notes
For sand filters: limit applications to a maximum of 2 L per one-time dose. Apply, wait 48 hours, backwash, then repeat if needed.
For cartridge or D.E. filters: limit applications to a maximum of 1 L per one-time dose. Apply, wait 48 hours, clean the filter, then repeat if needed.
Water may cloud slightly after application; this is normal.